An alert when an app misbehaves, with what to do about it.
Vitals tells you when an app has kept the CPU busy, kept growing in memory, or hammered the disk or the network, with the app named and what it has been doing, so you find out before the fans tell you. The alerts that need you come out of the notch, with Quit one click away.
The menu bar reading turns red first. If it stays that way, the alert comes out of the notch with the app named, what it has been doing, and Quit beside it.
The numbers are simulated: a web page cannot read your Mac, and should not.
The alerts that need you come out of the notch.
When the Mac runs out of memory, runs hot, or an app goes over a limit you set, the alert comes out of the notch with the number it is about and what you can do. Quit is one click, and it quits the way ⌘Q does, so the app can ask you to save. It goes again after a few seconds unless the pointer is on it.
- Quit or Show, with Not Now and Mute beside them
- The number it is about, as it is now
- At most one every two minutes, never over a full-screen app
- Under Vitals in the menu bar on a Mac without a notch
It watches for patterns, not spikes.
Chrome at 100% for a second is normal. Chrome at 70% for ten minutes is a tab you should find. Vitals waits for the patterns that actually mean something, then names the app and what it has been doing, so you are not nagged every time a build runs.
- An app keeping the CPU busy for ten minutes
- An app whose memory keeps growing for an hour
- A burst of disk or network far above its usual
- The Mac running hot for minutes at a time
Everything it noticed, and how things stand now.
Every notice lands in Worth a Look, beside the Overview, grouped by day. Something noticed three times is one row with a count, not three rows, and every row tells you how things stand right now, so you can see what resolved itself.
- Grouped by day
- Noticed several times is one row, with a count
- Narrow by type, pin what you want to keep
- Alerts muted by kind still collect here
Every limit is yours to set.
Settings → Insights holds every threshold: how much, and for how long. Tell Me When… adds a memory or CPU limit for one app, for the minutes you choose, so the one app you worry about gets its own watch.
- The CPU percent, and how many minutes
- How much memory growth, how large a burst
- How hot, for how long
- Your own limit for one app
The menu bar goes red before anything else.
Before any alert, the reading under strain turns red in the menu bar, and the dropdown tells you which limit was crossed and for how long. Once an app has been named it is left alone for an hour, so a known problem does not keep ringing.
- Red while a reading is under strain
- The dropdown says which limit, and for how long
- An app named once is left alone for an hour
- One setting for where alerts appear
Alerts, before and after
A Mac tells you something is wrong by getting hot, slow or loud, and by then it has been wrong for a while. Activity Monitor has no notifications: it shows the number if you happen to be looking, and the number that matters is usually one that has been climbing for an hour, not one that spiked.
The useful alert is about a pattern. Chrome at 100% for a second is normal; Chrome at 70% for ten minutes is a tab you should find. Slack at 3 GB is a lot; Slack growing by 1.4 GB in an hour is a leak.
Vitals watches for the patterns: an app keeping the CPU busy, an app whose memory keeps growing, a burst of disk or network far above usual, the Mac running hot for minutes, and any limit you set yourself for one app. The ones that need you come out of the notch with what you can do about them, such as quitting the app, and every one is a row in Worth a Look that says how things stand now. Once an app has been named it is left alone for an hour, Mute quiets an app, a kind of alert or all of them for an hour, until tomorrow or for good, and a Focus can keep Vitals quiet too.
Where it is in Vitals
The tab, the menu bar item and the setting, in the order you would reach for them.
- 01
Act on an alert
When an alert comes out of the notch, click Quit to quit the app, Show to open it in Vitals, or Not Now to close it. Mute opens a menu: that app, that kind of alert or every alert, for an hour, until tomorrow or for good. Leave it, and it goes after a few seconds.
- 02
See what Vitals noticed
Worth a Look opens beside the Overview, grouped by day. Something noticed several times is one row with a count, every row says how things stand now, and you can narrow the list by type and pin what you want to keep.
- 03
Set the thresholds
Settings → Insights: the CPU percent and how many minutes, how much memory growth, how large a disk or network burst, and how hot for how long. Show Insights there chooses where alerts appear: In the Notch, As Notifications or Only in Vitals.
- 04
Set a limit of your own
Settings → Insights → Tell Me When…, or right-click an app and choose Alert When…: a memory or CPU limit for that one app, for the minutes you set.
- 05
Quiet what you do not want to hear about
Mute on an alert, or a right-click on the app, quiets it for an hour, until tomorrow or for good. What you muted is listed in Settings → Insights under Don’t Tell Me About, each with Tell Me Again. Quiet During a Focus there holds alerts back while a Focus with Vitals’ filter is on.
Alerts: Activity Monitor and Vitals
The whole comparison is row by row. These are the rows about alerts.
The words behind it
What the numbers mean, from the Activity Monitor glossary.
- Memory pressure
Memory pressure is Activity Monitor's graph of how well the Mac's RAM is meeting current demand.
- Thermal throttling
Thermal throttling is when a computer lowers its processor speed to keep temperatures in a safe range.
- % CPU
% CPU is the share of processor capacity a process is using, measured per CPU core.
- Spinning wait cursor
The spinning wait cursor, often called the spinning beach ball, is the rainbow pointer macOS shows when an app has not responded to input for a few seconds.
- Not Responding
Not Responding is the label macOS gives an app that has stopped handling input.
Questions
The ones people ask about alerts before they buy.
What does Vitals alert me about?
An app that keeps the CPU busy, keeps growing in memory, or hammers the disk or network, the Mac running out of memory or running hot, and any limit you set for one app. Each names the app and what it has been doing.
Where do alerts appear?
The ones that need you come out of the notch on a MacBook, or as a card under Vitals in the menu bar on a Mac without one, with Quit, Show, Not Now and Mute. Heavy disk or network use and a busy Neural Engine come as notifications. To have every alert as a notification instead, or only in Vitals, choose in Settings → Insights → Show Insights.
Will I get an alert every time something is busy?
No. The CPU alert needs ten busy minutes and the memory alert an hour of growth, and once an app has been named it is left alone for an hour. At most one alert comes out of the notch every two minutes, and none comes over an app in full screen.
Can I turn alerts off?
Yes. Mute on any alert quiets every alert for an hour or until tomorrow. To turn them off for good, set Show Insights to Only in Vitals in Settings → Insights, and alerts wait under Worth a Look. Or raise a threshold instead, so a busy machine stops nagging without going quiet altogether.
Does Vitals stay quiet during Do Not Disturb or a Focus?
Yes. Add Vitals’ Focus filter, Quiet Vitals’ Alerts, to a Focus in System Settings → Focus, and while that Focus is on, alerts go to macOS as notifications, which the Focus holds back. With Full Disk Access, Vitals also notices a Focus you turn on by hand or on a schedule. Settings → Insights → Quiet During a Focus turns this off.
Does Activity Monitor have alerts?
No. Activity Monitor shows what is happening this second and never notifies you of anything.
Can I get an alert for one app?
Yes. Settings → Insights → Tell Me When…, or right-click the app and choose Alert When…, then set a memory or CPU limit and how many minutes it has to hold.
What if an app is meant to be busy?
Click Mute on its alert, or right-click the app, and mute it for an hour, until tomorrow or for good. Mute can also quiet one kind of alert, such as Busy CPU Alerts, for the same times. What you muted is listed in Settings → Insights under Don’t Tell Me About, each with Tell Me Again.
Does Vitals tell me when the Mac runs hot?
Yes: when it has been hot for a few minutes, which app is behind the heat, and how fast the fans are running. Set the temperature and the minutes in Settings → Insights.
Where do past alerts go?
Into Worth a Look, beside the Overview, grouped by day, with a count for anything noticed several times and how things stand now.
Read on
Guides that use this, and how Vitals compares with the apps people buy for it.
More of Vitals
All featuresDev servers and ports
Every process under its project, every port in use with what holds it, and the dev server left running since Tuesday pointed out.
Open files
Every disk with the apps holding files on it, and Quit Them and Eject for the drive that will not let go.
Homebrew
Every Homebrew package with its size and when it last ran, the services with Start and Stop, and what a cleanup would free.
Lifetime for $19 while the launch price lasts
at this price. Then $49, or $12 for a year of updates. One payment, 14-day refund.
Get Vitals for $19